Slt Series Air Compression System Heatless Module Adsorption Dryer Special Oxidation Anti-Rust Treatment

• Customization: Available
• Warranty: 1.5year
• Flow: Parallel Flow
• Model NO.: SLT0696
• Material Status: Solution
• Drying Medium: Effluent Gas
• Structure: Pressure Vessel
• Operation Pressure: 6~10bar
• Inlet Temperature: 0ºC~45ºC
• Type: Air Dryer
• Condition: New
• Usage: Provide Comressed Air
• Capacity: 6.96m³/Min
• Purge Air: 5%~6%
• Pressure Dew Point: -20ºC~-40ºC
• Filter Type: Compressed Air Filter Element
• Showroom Location: Viet Nam, Philippines, Brazil, Indonesia, Pakistan
• Feature: High Efficiency
• Brand: Sunwin
• Video Outgoing-Inspection: Provided
• Applicable Industries: Manufacturing Plant, Food & Beverage Factory
• Application: General Industry
• Machinery Test Report: Provided
• Transport Package: Export Wooden Box
• Specification: 740*320*1750
• Trademark: SUNWIN
• Origin: Shanghai, China
• HS Code: 8419399090
• Production Capacity: 2000 Sets/Year

Product Description

Product Picture

Product Parameters

 

Specification of SWT Series

Model	Flowrate@7bar35°C					Dimensions(mm)					Pipe Size	Weight
		m ^3/min	m ^3/h	cfm	L	W	H	G	KG
SWT156	1.56	93.60	55.07	586	260	1120	G1	68
SWT246	2.46	147.60	86.84	706	260	1120	G1	82
SWT305	3.00	180.00	105.90	826	260	1120	G1	105
SWT426	4.26	255.60	150.38	826	260	1340	G1	121

 

Specification of SLT Series

Model	Flowrate@7bar35°C					Dimensions(mm)					Pipe Size	Weight
		m ^3/min	m ^3/h	cfm	L	W	H	G	KG
SLT0696	6.96	417.60	245.69	740	320	1750	G1-1/2	178
SLT0875	8.75	525.00	308.88	865	320	1750	G1-1/2	216
SLT1063	10.63	637.80	375.24	990	320	1750	G2	254
SLT1276	12.76	765.60	450.43	1115	320	1750	G2	272
SLT1428	14.28	856.80	504.08	1240	320	1750	G2	310
SLT1796	17.96	1077.60	633.99	1490	320	1750	G2(G2-1/2)	386
SLT2088	20.88	1252.80	737.06	1615	320	1750	G2(G2-1/2)	462
SLT2465	24.65	1479.00	870.15	1130	480	1750	G3(G2-1/2)	560
SLT2853	28.53	1711.80	1007.11	1255	480	1750	G3	636
SLT3462	34.62	2077.20	1222.09	1380	480	1750	G3	714
SLT3836	38.36	2301.60	1354.11	1505	480	1750	G3	792
SLT4258	42.58	2554.80	1503.07	1630	480	1750	G3	870
SLT4680	46.8	2808	1652	1755	480	1750	DN100	948

 

Specification of SMT Series

Model	Flowrate@7bar35°C					Dimensions(mm)					Pipe Size	Weight
		m ^3/min	m ^3/h	cfm	L	W	H	G	KG
SMT0696	6.96	417.60	245.69	740	320	1750	G1-1/2	178
SMT0875	8.75	525.00	308.88	865	320	1750	G1-1/2	216
SMT1063	10.63	637.80	375.24	990	320	1750	G2	254
SMT1276	12.76	765.60	450.43	1115	320	1750	G2	272
SMT1428	14.28	856.80	504.08	1240	320	1750	G2	310
SMT1796	17.96	1077.60	633.99	1490	320	1750	G2(G2-1/2)	386
SMT2088	20.88	1252.80	737.06	1615	320	1750	G2(G2-1/2)	462
SMT2465	24.65	1479.00	870.15	1130	480	1750	G3(G2-1/2)	560
SMT2853	28.53	1711.80	1007.11	1255	480	1750	G3	636
SMT3462	34.62	2077.20	1222.09	1380	480	1750	G3	714
SMT3836	38.36	2301.60	1354.11	1505	480	1750	G3	792
SMT4258	42.58	2554.80	1503.07	1630	480	1750	G3	870
SMT4680	46.8	2808	1652	1755	480	1750	DN100	948

 

Specification of SST Series

Model	Flowrate@7bar35°C					Dimensions(mm)					Pipe Size	Weight
		m ^3/min	m ^3/h	cfm	L	W	H	G	KG
SST050	0.5	30	17.65	370	300	810	Rc1/4"	23
SST080	0.8	48	28.24	370	300	1120	Rc1/2"	30
SST100	1	60	35.3	370	300	1300	Rc3/4"	35
SST150	1.5	90	52.95	370	300	1450	Rc3/4"	37

Compressed Air Line Filter

Desiccant Compressed Air Dryer

Combined Air Compressor

Advantages

 

SST series is of small size and weight with high adsorption efficiency, the small compressed air capacity needed, such as, point of use in factory Laboratory and etc.

 

Help to decrease equipment faulty rate and production lost; Small size and light weight‚ easy installation and movable‚ tight space needed ; Relatively quite‚ less than 75db(A); PLC controller ensure the stability and reliability; Extremely low pressure drop and stable pressure dew point; Whole Aluminum alloy configuration‚ high strength and high anticorrasion; Compact construction contribute to Easy replacement of desiccant and good performance after replacement; High efficient Molecular sieve used make sure to achieve ISO8573.1.2 standard‚ PDP-40°C/-40°F‚ and PDP-70°C is optional

Buil-in filters are optional;

Dual-Core Construction

Exclusive Dual-Core design contribute to even and equal flow pass through each desiccant tube and desiccant bed,avoid desiccant dusting and Tunnel-Effect which likely happen in other traditional desiccant dryer ,those will cause deadly results on Pressure Dew Point,further more,dust and wet air definitely lead to the severe damage on air equipment.Dual-Core Modular design solve these problem and maintain permanent performance on DPD -40°C /-40°F

Dual-Core desiccant tubes are perfectly secured with bottom and top manifold and the sophisticated construction design can help the flow pass with minimum resistance,it all lead to minimum pressure drop and minimum purge lost compare to traditional desiccant dryer.

 

Independent In-Core desiccant tube

Removable In-Core tubes can be replaced directly on site with Copsair original filled brand-new In-Core desiccant tube, it make sure the PDP performance is absolutely same with new dryer

 

Double Guaranty Of Anti-Leakage

Leakage is always the potential risk for traditional modular dryer due to compact and manifold construction ,Dual-Core design can give double warranty to prevent leakage ,Dual-seal, Dual-Pressure-Hold, Dual-Anti-Leakage,it contribute to more energy saving and stability.

 

Desiccant replacement

Disadvantages: Difficult to replace on site; Great amount desiccant need to be discharged filled; Need four times work-hour compare to ours at same capacity; Loosened and low density of filled desiccant lead to gradually high PDP in short time; Environment unfriendly and risk for operator.

Advantages:Directly replace In-Core desiccant tubes without touch desiccant; Sunwin factory filled In-Core tube make sure to maintain good PDP performance same as new dryer; Minimum time needed, withdraw old tubes and insert new tubes and lock, it is done; Environment friendly.

 

Features and Benefits

 

Independent Inlet and Purge valve

Adapt independent solenoids and valves to control inflow and purge separately and they are in different side ,this help them work without interference with each other and avoid leakage which more likely happen in other type modular dryer. Independent valves make sure the valve control air work accurately without interference. Easy maintenance and replacement of valves and seal,change the faulty valves directly without dismantle other parts, but in traditional modular dryer,it need to dismantle whole inlet and purge valve set,it need long time and more cost to change whole seal Kit.

 

 

Precise flow distribution

Sophisticated Up and Down manifold design contribute to equal flow in each IN-Core desiccant tube,make sure each desiccant bean to adsorb efficiently without Tunnel-Effect.

 

 

Friendly Ul design

Use Made-in-Japan Mitsubishi PLC and 7inch LED touch screen with user friendly UI, user can easily monitor dryer status and change the working parameter according real condition to save energy and achieve good performance.

LEGO type Modular combined

Bank Installation and How to Increase Capacity

Example: Needed maximum capacity 200m3/min,7bar, Inlet 35°C. Solution one: Twin Tower dryer ,Two 200m3/min dryers needed, one work and one standby,200m3/min capacity standby. Solution two: Dual-Core Modular dryer, 7 units of 34.6m3/min needed ,six work and only one 34.6m3/min standby.

 

 

-Features and Configuration

-The Correction Factor for Airflow Capacity Selection

 

How to select minimum flowrate

Confirm the maximum inlet air temperature to choose the correction factor( T). Confirm the minimum air pressure to choose the correction factor ( P). Calculation Method:

Expected Dryer Minimum Operation Capacity=Compressed Air Flow/(T x P ). Input the related factor into the formula above, select the operation capacity larger or equivalent to "Expected

Operation Capacity" Dryer model you need.

 

 

Standard: Inlet Pressure 7Bar Inlet Temperature T≤35°C Pressure Range: 4.5Bar≤ P <10Bar Temperature Range: 2°C≤T≤45°C Data: Pressure Dew point PDP≤-40°C; Pressure drop 0.15Bar; Purge Lost: 2% to 3% (SMT series); 5% to 6% (SLT&SWT series); Noise ≤75dB(A).